The Setup for the Wi-Fi Range Extender Via Mywifiext.local or Mywifiext.net
Mywifiext Setup increases the scope of the WiFi network by increasing the current WiFi signal and enhancing the overall strength of the signal over long distances. From an existing WiFi router or access point, the extender replicates the signal.
How the Netgear WiFi Extender can be activated:
By applying power, place the extender and attach it to your WiFi network.
Place and attach power to the Extender from the electric socket.
Place the Netgear Extender Setup in the same space as the WiFi for your router.
Note: Proximity to the WiFi router is critical only during the initial setup process.
Attach an electrical socket to your extender.
The LED Lights of Green Power.
When the power LED fails to light up, press the power button.
WPS allows you to set up your Netgear WiFi Extender Setup wirelessly.
No WPS is supported by WEP network security. If security is used by you for WEP,
Click on the WPS button on the side-screen of the extender.
The WPS LED blinks.
Click the WPS button on your router or access point within two minutes. The existing WiFi network is connected to the WPS LED on the solid green extender lights, the Router Connection LED lights, and the extender.
Find the name of an extension's wireless network name (SSID) and change it to the actual name of the WiFi network...
The position that you select must be within your current network range of WiFi routers.
Wire with an extender in an electrical socket. The LED Lights of Green Power. When the power LED fails to light up, press the power button. Use the Router Link LED on the front panel to help you select a place where the extender-to-router connection is best.
NETGEAR Genie Smart Setup
Using a WiFi network manager to find and connect NETGEAR EXT (SSID) to a computer or mobile device. After the computer or mobile device connection is mounted, the Client Link LED lights are set up.
On the same desktop or mobile computer, open a window for a web browser. The browser takes you straight to the intelligent Netgear Genie Setup.
Pick it up to expand the WiFi network, then press the Continue button.
Enter the default login credential details.
Select your WiFi network and hit the next button.
Enter the name (SSID) of the New Extender in the Name area, and then press the Continue button.
Using the WiFi network manager of the computer or mobile device to connect to the extender's newly enabled WiFi network. If there's still a screen on your computer or phone, click the following check box and press the Continue button.
Unplug the extender and move it to a new location with a weak signal for WiFi closer to the extensor region. The position you pick must fall within the range of your established WiFi router network.
Wire with an extender in an electrical socket. The LED Lights of Green Power. When the power LED fails to light up, press the power button. Use the Router Link LED to help you select a location where the extender-to-router connection is strongest.
Find the right position
If the WiFi signal is low, an arrow LED blinks for two minutes when you first hit the extender network. Adjust the Netgear WiFi Extender Setup position if this happens.
The arrow LEDs are not highlighted.
Place your Extender in a good spot within the range of your router.
Router arrows blinking.
Move the extender near to the router.
Blinks with arrows from clients. Toggle the computer or mobile device next to the extender.
Extender to effectiveness
These extender LEDs show the WiFi connection: the WiFi signal between the router, and the WiFi signal between the extender and your computer or mobile device.